Golden Halo Color PPF
 
Golden Halo is a solid gloss Color PPF with a clean white base and a warm gold color-shift effect. Unlike transparent effect films, Golden Halo provides full color coverage, transforming the vehicle to a refined pearl white while revealing soft golden tones as the lighting and viewing angle change.
 
In normal lighting, the film appears primarily white. Under direct light, reflections, and certain viewing angles, the surface develops a noticeable gold or champagne-like glow that follows the vehicle’s body lines.
 
The final appearance will vary depending on lighting conditions, viewing angle, and panel shape, allowing the gold effect to appear stronger or softer across different areas of the vehicle.
Finish: High Gloss
Film Type: Solid Color PPF
Base Color: White
Effect: White to Gold Color Shift
Appearance: Primarily white with gold / champagne highlights at certain angles
 
PLEASE READ BEFORE PURCHASING
 
Golden Halo is a color-shifting film, meaning its appearance changes depending on lighting and viewing angle. The vehicle will appear predominantly white, with gold tones becoming visible through reflections and directional light.
 
The amount of gold visible can vary depending on the environment, lighting source, panel shape, and angle from which the vehicle is viewed. Product photos are intended to demonstrate the color-shift effect and may appear slightly different under different lighting conditions.
 
Recommended installer skill level:
Color PPF: Professional Level
For best results, we strongly recommend installation by an experienced automotive PPF professional. Proper stretching technique, edge preparation, installation solution, and working conditions are important for achieving a clean and consistent finish.
 
Bespoke Wraps is not responsible for material damaged as a result of improper installation, excessive stretching, incorrect application techniques, or installer error.
 
 
Bespoke Wraps Color PPF
Material: Self Healing Thermoplastic Polyurethane (TPU) made with 🇺🇸 Lubrizol brand TPU resins
Thickness: 7.5 mil or more (where options are available)
Roll size: 60 in x 50 ft
Compatible Post-Install Finishes: Ceramic, Polish, Wax, Quick Detailer
Liners: PET Release Liner on all finishes, PET cap sheet on glossy finishes
Adhesive: 🇺🇸 Ashland brand, Acrylic Pressure-Sensitive, Transparent
Removability: Removable with heat with minimal residue
Recommended Install Area Temperature: 70 F - 80 F (24 C - 26.5 C)
Storage: 2 Years from the Manufactured Date. Store in Range of 68 F - 78 F (20 C - 26 C) & Relative Humidity <50%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt
Application Method: Wet Application / Soapy Solution
Warranty Against Manufacturing Defects: 5 years
Application Surfaces: All Smooth Painted Surfaces, Stainless Steel, Compound Curves, Concave Surfaces, Flat Areas, Simple Curves (Do Not Apply to Textured Surfaces)
Shipping Size: 63" x 6" x 6" box, ~26 lbs (varies)
Coating cracks: 190%~260%, fracture 23.7 MPa
Adhesive (15 Minutes): 13.7 N/25 mm
Adhesive (24 Minutes): 117.9 N/25 mm
Weather resistance (Constant moist heat): 85°C (185°F)